| BONUS Pioneer HDJ-1000 Headphones!
RANE TTM-57L 2 Channel DJ Mixer with Scratch Live
The TTM-57SL combines the best Rane and Serato have to offer in a single, high performance mixer. Finally a mixer that fully integrates mixer hardware, software and software controls in one powerful package. The TTM-57SL combines all the performance and features of the Rane TTM-56 with Serato Scratch LIVE software. We didn't stop there -- we also included internal effects with six stereo insert points. The TTM 57SL allows the user to simultaneously play a combination of digital and analog sources. You can also play up to two digital files controlled by vinyl or CD while recording your mix. Features:- Two Input Buses
- PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
- PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
- All analog inputs are phono or line capable
- Input Gain and Left/Right Pan controls
- 3-band, full cut Tone controls with Kill switches
- Magnetic faders for Channel Faders and Crossfader
- Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
- Independent Contour and Reverse controls
- Microphone Input with Engage switch, Level control and 2-band Tone control
- Three sets of Outputs, each with independent Level controls
- Main Out on XLR (balanced)
- Booth Out on 1/4" TRS (balanced)
- Auxiliary Out on RCA (unbalanced)
- Assign Program 1, Program 2 or Both to external FlexFx loop
- Internal Filter and Delay Effects with six possible insert points
- Pre- or Post-channel faders for Program 1 and Program 2
- Main Mix
- Auxiliary Input Bus
- Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
- 8 Channels of Streaming Audio
- 16 bit / 44.1 kHz Streaming Audio
- Four channels from computer (Stereo source Digital 1 and Digital 2)
- Four channels to computer (Stereo Record 1 and Record 2)
- Stereo Recording
- Stereo Record 1 may be used for 4-channels of control
- Select Analog 1 or Analog 2 for Control Input 1
- Select Analog 3 or Analog 4 for Control Input 2
- Additional "soft" mixer controls used by Scratch LIVE & internal effects
- Foot switch input (Inputs on Tip and Ring; foot switch not included)
- Deck 1-2 switch
- Group switch
- B1 - B6 programmable switches
- P1 - P2 programmable Encoders with push switches
- J1 - J2 programmable Joysticks with push switches
- USB firmware updates
- Internal universal switching power supply
|
A software/vinyl solution that works without glitches!
Check out the forums, you'll see that the Serato
Scratch Live by Rane is way more reliable and easier
to use than earlier digital/vinyl interfaces. Using
regular turntables or CD players, you can scratch
and mix files from your Mac or Windows XP computer's
CD or hard drive, add in a live mic input for
scratching, and even bypass to standard vinyl if you
wish. The Rane Serato's unique control screen gives
you unprecedented realtime side-by-side visual
command with color-coded frequencies so you can
distinguish bass and snare hits for flawless beat
matching. You can even control song selection from
the vinyl.
|
|
