Key Digital 4K/18G HDBaseT POH Extenders (Includes KIT Tx/Rx 4K/40meters 1080P/70meters) KD-X444S
-
HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
-
4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
-
Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx.
-
Low Profile: Super slim chassis design
-
4K/UHD: U p to 125 ft. (40m)
-
1080p: Up to 230 ft. (70m) maximum
-
Long Range Mode: Extends 1080p signals up to 500 ft. (152m) using CAT5e/6 (UHD/4K not supported)
-
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
-
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
-
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
-
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
-
EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
-
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
-
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
-
3D Pass-through: Support for 3D enabled by default EDID handshake library or EDID copy from 3D supported display
-
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
-
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
-
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
-
Lossless compressed digital audio: Support for Dolby® TrueHD,Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
-
CEC Pass-thru: For inter-device control between input and output HDMI channel