Features

• Presentation Switcher Kit: Includes KD-UFS42 and KD-X40MRx.

• Presentation Switching: 2 HDMI, 1 Display Port, and 1 VGA + L/R audio source selection by push button, IP, RS-232, IR, auto switching, or trigger control.

• Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)

• Auto-Switching: Automatic selection of newly detected source and switching from newly disconnected source when enabled

• CEC Manager™: Power, volume, and muting controls of the connected display/projector without any additional control wiring. Selection of desired CEC command recipient.

• KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager™

• KDPlug & Present™ Ready: Add KD-CX800 to build a programming-free automation system

• Ease of Integration: Complete configuration using Key Digital Management Software™ Pro

• Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors.

• KD-AMP220 Control Mode: Command forward to KD-AMP220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement

• PTZ USB Camera Integration: Add KD-CAMUSB for full PTZ control via KD-App. Use with KD-XUSB2 extender for USB signal extension over CAT5e/6.

• HDCP Licensing: Fully licensed and compatible with HDCP 2.2

• HDR10+ and Dolby Vision: More life-like images through a greater range of luminance levels

• Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-UFS42

• Installation: Half-rack width with rack and under-table mounting ears included

• Signal Extension: For resolution and cable quality

• • 4K/UHD (18G): Up to 40m / 131ft

  • 1080p: Up to 70m / 230ft

• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:2:2/12 bit

• Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage

• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device

• RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit

• Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit

• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1

• Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus, DTS-HD Master Audio™, and Dolby® Atmos

• Control System Support: Key Digital® App ready. Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.

Technical Specifications

• AV Inputs: 2x HDMI, 1x Display Port, 1x VGA
• AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA
• DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
• HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• Display Port Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• VGA Video Signal: Input Video Signal: 1.2 Volts p-p
• RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN
• Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro
• RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output
• IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from HDBaseT Output
• RS-232 Connector: 3-pin phoenix terminal    

General Specifications

• Regulation: CE, RoHS, WEEE, EAC
• Enclosure: Black metal
• Product Dimensions: 8.27 x 6.42 x 1.75” (210 x 163 x 44.4mm)
• Product Weight:  Weight: 3.5 lbs / 1.59kg
• Packaging Dimensions: 15.16 x 9.10 x 3.94 (385 x 230 x 100 mm)
• Packaging Weight: 11.0 lbs / 5kg